factory Outlets for 7000 Series Aluminum Sheet - Aluminum 6061 Alloy ASTM B209 6061 T6 T651 Plate Sheet – Miandi

Product Detail

6000 series aluminium alloys are alloyed with magnesium and silicon. Alloy 6061 is one of the most widely used alloys in the 6000 Series. It has good mechanical properties, it is easy to machine, it is weldable, and can be precipitation hardened, but not to the high strengths that 2000 and 7000 can reach. It has very good corrosion resistance and very good weldability although reduced strength in the weld zone. The mechanical properties of 6061 depend greatly on the temper, or heat treatment, of the material. In comparison to 2024 alloy, 6061 is more easily worked and remains resistant to corrosion even when the surface is abraded.

Type 6061 aluminum is one of the most widely used aluminum alloys. Its weld-ability and formability make it suitable for many general-purpose applications. Its high strength and corrosion resistance lend type 6061 alloy particularly useful in architectural, structural, and motor vehicle applications.

Chemical Composition WT(%)
Silicon	Iron	Copper	Magnesium	Manganese	Chromium	Zinc	Titanium	Others	Aluminum
0.4~0.8	0.7	0.15~0.4	0.8~1.2	0.15	0.05~0.35	0.25	0.15	0.15	Balance

Typical Mechanical Properties
Temper	Thickness (mm)	Tensile Strength (Mpa)	Yield Strength (Mpa)	Elongation (%)
T6	0.4~1.5	≥290	≥240	≥6
T6	1.5~3	≥290	≥240	≥7
T6	3~6	≥290	≥240	≥10
T651	6~12.5	≥290	≥240	≥10
T651	12.5~25	≥290	≥240	≥8
T651	25~50	≥290	≥240	≥7
T651	50~100	≥290	≥240	≥5
T651	100~150	≥290	≥240	≥5